The PTMEG antidumping investigation has entered its decisive injury phase, placing importers, industrial users, chemical distributors, and customs brokers on a compressed compliance calendar. With preliminary margins reaching triple digits for some origins, every affected company should validate scope, cash deposits, liquidation status, and sourcing exposure before the January 2027 hearing.
What the ITC Final Phase Means for PTMEG Importers
The U.S. International Trade Commission has scheduled the final phase of antidumping investigations covering polytetramethylene ether glycol from China, South Korea, Taiwan, and Vietnam. The investigations are identified as Nos. 731-TA-1782-1785. The proceeding follows affirmative preliminary less-than-fair-value determinations and preliminary cash deposit requirements administered by the Department of Commerce.
Injury and Dumping Are Separate Determinations
Commerce generally determines whether merchandise is being sold in the United States at less than fair value and calculates applicable dumping margins. The ITC separately determines whether the domestic industry is materially injured or threatened with material injury because of the subject imports.
Both agencies generally must reach the necessary affirmative final determinations before an antidumping duty order can be issued for a particular country. If the ITC reaches a negative final injury determination, the corresponding investigation generally terminates, suspension of liquidation is lifted, and preliminary cash deposits may be refunded. Importers should not assume that outcome while the final phase remains pending.
Preliminary margins vary significantly by origin and producer. They include 213.44 percent for the China-wide entity, 36.55 percent for the Vietnamese respondent and all other Vietnamese producers, 25.32 percent for Korea PTG Co., Ltd. and all others from South Korea, and 49.79 percent for BASF Company Ltd. Taiwan rates include 7.46 percent for Dairen Chemical Corporation and all others, and 26.42 percent for Formosa Asahi Spandex Co., Ltd.
Product Identification Requires More Than an HTS Code
PTMEG may also be described commercially as polytetrahydrofuran, PTHF, PTMG, or polybutylene glycol. Relevant entries may appear under HTSUS subheadings 3907.29.00, 2932.11.00, or 3404.91.51. These classifications can help identify exposure, but the written product scope typically controls. Importers should review chemical composition, technical specifications, product descriptions, and origin rather than relying exclusively on the declared tariff classification.
Critical Dates for the January 2027 ITC Hearing
The public hearing is scheduled for 9:30 a.m. on January 20, 2027. Importers, domestic producers, foreign producers, purchasers, industrial users, and other interested parties may need to act well before that date if they want their information or testimony included in the final-phase record.
Hearing and Briefing Calendar
The principal milestones are:
- January 6, 2027: Prehearing staff report.
- January 13, 2027: Prehearing briefs.
- January 14, 2027: Requests to appear at the hearing.
- January 15, 2027: Prehearing conference.
- January 19, 2027, at noon: Written testimony and presentation slides.
- January 20, 2027, at 9:30 a.m.: ITC hearing.
- January 27, 2027: Posthearing briefs and nonparty written statements.
- February 11, 2027: Release of information not previously available for comment.
- February 16, 2027: Final comments on newly released information.
Entries of appearance are due no later than 21 days before the hearing. Parties should calculate that deadline independently and avoid treating the later request-to-appear deadline as a substitute for a timely entry of appearance.
Verify the Year Before Filing
Certain listed January milestones display 2026 even though the final-phase sequence and the hearing date point to January 2027. Participants should confirm every filing deadline through the ITC's Electronic Document Information System and current docket instructions. A typographical inconsistency does not necessarily protect a party that misses an operative deadline.
Companies planning to participate should also establish responsibility for confidential business information, witness preparation, internal approvals, and filing logistics. Prehearing briefs commonly require coordinated input from legal, commercial, procurement, finance, and supply chain teams. Waiting until testimony is due can leave insufficient time to reconcile purchasing records, import volumes, pricing information, and downstream demand evidence.
Compliance and Supply Chain Priorities
Suspension of liquidation and preliminary cash deposit requirements took effect for covered entries on or after November 10, 2026. Importers should continue depositing estimated antidumping duties unless Customs and Border Protection or Commerce issues different instructions. The ITC hearing does not suspend those entry requirements.
Audit Scope, Origin, and Deposit Instructions
Importers and customs brokers should create a transaction-level population of potentially covered entries. The review should include product names, aliases, chemical specifications, country of origin, producer, exporter, entry date, HTS classification, entered value, deposit rate, and liquidation status. Broker instructions should clearly identify which supplier-specific rate applies and whether the producer and exporter combination matches the applicable instructions.
Product origin deserves particular attention when PTMEG is purchased through distributors, regional trading companies, or related-party networks. Country of export does not necessarily establish country of origin. Importers should obtain origin support from suppliers and retain technical documentation sufficient to evaluate whether the merchandise falls within the written scope.
Companies should also examine whether purchase contracts address unexpected trade remedy duties. Incoterms and commercial arrangements may allocate transportation or commercial costs, but the importer of record generally remains responsible to U.S. authorities for accurate entry declarations and required deposits.
Model the Full Financial Exposure
Preliminary cash deposits are not necessarily the final liability. Final rates may change, and liquidation can occur later at assessment rates determined through the antidumping process. Finance teams should therefore distinguish current cash requirements from potential ultimate duty exposure.
The supply chain impact extends beyond the imported chemical. PTMEG is used in products such as spandex fiber, thermoplastic polyurethane, elastomers, adhesives, and coatings. Higher import costs or reduced availability can affect sourcing decisions, customer pricing, inventory strategy, and production planning. Alternative suppliers should be assessed for capacity, qualification requirements, origin, lead time, and their own antidumping exposure.
Antidumping and countervailing duties generally cannot be recovered through duty drawback. Eligible ordinary customs duties may still qualify when all drawback requirements are satisfied, but companies should not include antidumping cash deposits in projected drawback recoveries. Separating recoverable duties from nonrecoverable trade remedy duties is essential for accurate forecasting.
- The U.S. International Trade Commission issued a notice on November 17, 2026 (Federal Register Doc. 2026-23624, filed November 19 and published November 20, 2026) scheduling the final phase of antidumping investigations Nos. 731-TA-1782-1785 on PTMEG from China, South Korea, Taiwan, and Vietnam. A public hearing is set for 9:30 a.m. on January 20, 2027, with prehearing briefs due January 13, 2027, written testimony and slides by noon on January 19, 2027, and posthearing briefs by January 27, 2027.
- Commerce published preliminary affirmative less-than-fair-value determinations on November 10, 2026, calculating dumping margins of 213.44 percent for the China-wide entity (based on adverse facts available), 25.32 percent for Korea PTG Co., Ltd. and all others from South Korea (49.79 percent for BASF Company Ltd. based on adverse facts available), 7.46 percent for Dairen Chemical Corporation and all others from Taiwan (26.42 percent for Formosa Asahi Spandex Co., Ltd. based on adverse facts available), and 36.55 percent for Hyosung Dong Nai Company Limited and all others from Vietnam. Suspension of liquidation and cash deposit requirements took effect for entries on or after November 10, 2026.
- Industry coverage from November 9-13, 2026 highlighted that the 213.44 percent China rate is expected to effectively halt Chinese PTMEG exports to the United States, with potential disruption to U.S. supply chains for spandex fiber, thermoplastic polyurethane, elastomers, adhesives, and coatings. South Korea had been the largest supplier by volume in recent years.
- Practitioner and industry commentary on X around November 11, 2026 observed that the preliminary duties proceeded independently of a broader U.S.-China tariff truce (extended to January 10, 2027), noting that no Chinese producers received separate rates and that final determinations remain pending. Related posts discussed downstream effects on spandex pricing amid rising PTMEG costs.
Frequently Asked Questions
What Products Are Covered by the PTMEG Investigations?
The investigations concern polytetramethylene ether glycol from China, South Korea, Taiwan, and Vietnam. PTMEG may also be sold as polytetrahydrofuran, PTHF, PTMG, or polybutylene glycol. Although several HTSUS subheadings are associated with the merchandise, the written scope generally determines coverage. Chemical specifications and product characteristics should be reviewed carefully.
Are the Preliminary Antidumping Margins Final?
No. Preliminary margins establish current cash deposit requirements, but they are not necessarily the final assessment rates. Commerce may revise its calculations in the final determination or later administrative proceedings. The ITC must also complete its final injury analysis before an antidumping duty order can generally be imposed for an investigated country.
Can PTMEG Antidumping Duties Be Recovered Through Drawback?
Antidumping duties generally are not eligible for duty drawback. The same general restriction applies to countervailing duties. Importers may still evaluate whether ordinary customs duties, taxes, or fees associated with eligible transactions qualify for drawback, but trade remedy deposits should be excluded from expected refund calculations.
What Should Customs Brokers Do Now?
Customs brokers should review affected client accounts, confirm written scope analysis, validate producer and exporter details, and verify that the correct deposit rates are being transmitted. They should also monitor liquidation status and retain clear client instructions. When facts are uncertain, brokers should escalate the issue rather than relying solely on historical HTS classifications.
What Happens if the ITC Reaches a Negative Determination?
A negative final injury determination generally ends the corresponding investigation. Suspension of liquidation would typically be lifted, and cash deposits collected under the preliminary determination may be refunded. Until the final outcome and implementing instructions are issued, importers should continue complying with existing deposit requirements.
How Stable Software Can Help
Keep Drawback Separate From Antidumping Exposure
The PTMEG investigations illustrate why customs brokers and importers must distinguish recoverable ordinary duties from nonrecoverable antidumping and countervailing duties. Accurate separation prevents overstated refund projections and supports more reliable duty planning.
Stable Software offers DrawbackAI, flat-license duty drawback software that U.S. customs brokers can white-label for importer clients and use to file under their own filer code. Stable Software charges a flat software license and never takes a percentage of the refund. Brokers evaluating drawback opportunities alongside changing PTMEG duty exposure can use the platform to support their duty drawback services while keeping trade remedy duties outside expected recovery amounts.
Resources
| Type | Resource |
|---|---|
| Source | Primary source |



