The Malaysia antidumping reviews covering silicon metal and polyethylene retail carrier bags produced preliminary 0.00 percent dumping margins for the reviewed companies. Importers should not treat those findings as immediate duty relief, however, because verification, final determinations, liquidation instructions, and company-specific sourcing details still control the financial outcome.
Preliminary Results for the Two Malaysian Products
Silicon Metal From PMB Silicon
The silicon metal administrative review covers entries made from June 1, 2024, through May 31, 2025. Commerce calculated a preliminary weighted-average dumping margin of 0.00 percent for PMB Silicon Sdn. Bhd., the sole respondent examined in the review.
Commerce also preliminarily declined to revoke the antidumping order. PMB Silicon had requested revocation, but Commerce determined that the applicable requirements under 19 CFR 351.222 had not been met. As a result, the order remains in force even though the reviewed company received a preliminary zero margin.
Verification remains an important step. Commerce intends to verify the information used in its preliminary analysis, including through on-site procedures. Any verification findings could influence the final margin, particularly if Commerce identifies reporting errors, unsupported adjustments, or discrepancies between questionnaire responses and company records.
The existing all-others cash deposit rate for silicon metal remains 12.27 percent. That rate continues to matter for exporters or producer-exporter combinations that do not qualify for a company-specific rate.
Polyethylene Retail Carrier Bags From Euro SME
The carrier bag review covers entries made from August 1, 2024, through July 31, 2025. Euro SME Sdn. Bhd. and Euro Nature Green Sdn. Bhd., treated as a single entity, received a preliminary weighted-average dumping margin of 0.00 percent.
The all-others rate remains 84.94 percent, creating a substantial difference between the reviewed entity's preliminary result and the rate potentially applicable to other Malaysian suppliers. That contrast makes accurate producer and exporter identification essential. A product's Malaysian origin alone does not establish eligibility for Euro SME's preliminary margin.
Both administrative reviews began on September 25, 2025. Their schedules were subsequently extended after federal government operations affected agency deadlines.
Why a Preliminary Zero Margin Does Not Change Deposits Yet
Preliminary Results Are Not Final Instructions
A preliminary 0.00 percent margin signals that Commerce did not identify dumping for the reviewed company at this stage of the proceeding. It does not immediately replace the cash deposit rate applied by U.S. Customs and Border Protection. Importers should generally continue depositing antidumping duties at the rate currently associated with their entries until Commerce publishes final results and issues corresponding instructions to CBP.
Commerce intends to conduct verification in both reviews. Case briefs are due seven days after the final verification report, and rebuttal briefs are due five days after case briefs. Interested parties may also request a hearing within 30 days of publication of the applicable preliminary results. Arguments submitted during this process may challenge sales calculations, cost reporting, affiliations, adjustments, or other elements of the preliminary analysis.
If a final weighted-average dumping margin is below 0.50 percent, it is generally treated as de minimis. A qualifying final result would normally produce a zero cash deposit rate for future entries associated with the reviewed company, effective after publication of the final results and subject to Commerce's instructions.
Company-Specific Rates Require Exact Matching
Customs teams should confirm both the producer and exporter shown in purchasing records, commercial invoices, entry documentation, and antidumping case data. Company-specific rates generally apply only when the relevant producer-exporter relationship satisfies the scope of Commerce's instructions.
Entries from an unreviewed exporter, a different producer, or a supplier using a trading company may remain subject to an existing intermediate, combination, or all-others rate. For carrier bags, misapplying a preliminary zero margin instead of the 84.94 percent all-others rate could create significant exposure. Brokers should therefore avoid changing entry treatment based solely on a supplier's statement that it is affiliated with or purchases from a reviewed company.
Compliance Priorities for Importers and Customs Brokers
Validate Entry and Supplier Data
Importers should build a complete entry population for each period of review and identify the manufacturer, exporter, importer of record, entry date, entered value, case number, and deposited antidumping duty. That analysis helps determine which entries may ultimately receive the reviewed rate and which entries remain exposed to another rate.
For silicon metal, teams should isolate entries associated with PMB Silicon during the June 1, 2024, to May 31, 2025 period. For polyethylene retail carrier bags, they should separately identify entries associated with the Euro SME and Euro Nature Green entity during the August 1, 2024, to July 31, 2025 period.
Supporting records should be retained in a form that allows compliance personnel to reconcile supplier declarations with customs entry data. Product descriptions, invoices, purchase orders, manufacturer identifications, origin documentation, and broker instructions can become critical when determining whether a company-specific result applies.
Monitor Final Results and Liquidation Activity
Compliance teams should track verification reports, briefing deadlines, final results, and subsequent CBP messages. If the preliminary margins remain unchanged in the final determinations, qualifying entries from the reviewed companies would generally be expected to liquidate without antidumping duties, subject to the final assessment and liquidation instructions.
Importers should also monitor liquidation status and protest deadlines. Administrative review results can affect entries long after importation, and premature liquidation or an incorrect rate may require prompt action. Customs brokers should maintain clear escalation procedures when CBP instructions appear inconsistent with entry records or supplier information.
Antidumping and countervailing duties generally cannot be recovered through duty drawback. Importers should keep AD and CVD amounts separate from ordinary customs duties, fees, and other potentially eligible charges when evaluating recovery opportunities. This distinction prevents projected drawback refunds from being overstated and supports more accurate landed cost analysis.
- On November 13, 2026, Commerce published preliminary results in the silicon metal from Malaysia AD administrative review (A-557-820, POR June 1, 2024 to May 31, 2025), assigning a 0.00 percent weighted-average dumping margin to sole respondent PMB Silicon Sdn. Bhd.* Commerce also preliminarily determined not to revoke the August 2021 order, finding PMB Silicon had not met the requirements of 19 CFR 351.222(e)(1). Petitioners (Ferroglobe USA, Inc. and Mississippi Silicon) requested on-site verification on March 11, 2026, and Commerce intends to verify. The all-others cash deposit rate remains 12.27 percent. Comments are due after the last verification report; finals are expected later.
- On November 16, 2026, Commerce published preliminary results in the polyethylene retail carrier bags from Malaysia AD administrative review (A-557-813, POR August 1, 2024 to July 31, 2025), assigning a 0.00 percent margin to Euro SME Sdn. Bhd. and Euro Nature Green Sdn. Bhd. (treated as a single entity).* Commerce intends to verify. The all-others rate remains 84.94 percent. If unchanged in finals, entries during the POR from Euro SME would liquidate without AD duties, and its cash deposit rate would drop to zero upon publication of finals.
- PMB Technology Berhad (linked to PMB Silicon) received unanimous shareholder approval on November 16, 2026, to diversify into silicon-aluminium alloy manufacturing.* The company plans a RM650 million plant at Samalaju Industrial Park in Sarawak (same site as existing silicon metal operations), with commercial start targeted for Q2 2027, funded partly by borrowings. This follows losses in silicon metal (net loss of RM48.16 million in 1H 2026) due to oversupply and weak prices, and involves reallocating power capacity plus partial suspension of silicon metal production.
- The AD orders covering polyethylene retail carrier bags from Malaysia (and several other countries) are undergoing their third five-year sunset review, initiated September 1, 2026.* Comments on the adequacy of responses were due November 16, 2026; an ITC vote on whether to conduct a full or expedited review is expected in early December 2026. Orders remain in effect during the review.
- Limited recent practitioner discussion appeared on X, including a November 16, 2026 post noting the bags prelim zero-margin finding and its potential impact on sourcing and landed costs pending comments and finals. No major additional regulatory actions or briefs were identified in the period.
Frequently Asked Questions
Does a Preliminary 0.00 Percent Margin Eliminate Current Cash Deposits?
No. Importers should generally continue using the cash deposit rate currently required for the entry until final results are published and Commerce instructs CBP to apply a new rate. Preliminary findings do not independently authorize an importer or broker to enter merchandise at a zero antidumping duty rate.
Which Companies Received the Preliminary Zero Margins?
PMB Silicon Sdn. Bhd. received the preliminary 0.00 percent margin in the silicon metal review. Euro SME Sdn. Bhd. and Euro Nature Green Sdn. Bhd., treated as a single entity, received the preliminary 0.00 percent margin in the polyethylene retail carrier bag review. Other Malaysian suppliers do not automatically receive these results.
What Happens if the Final Margin Remains Below 0.50 Percent?
A final weighted-average dumping margin below 0.50 percent is generally considered de minimis. Commerce would typically establish a zero cash deposit rate for qualifying future entries from the reviewed company. Entries covered by the review would be assessed according to the final results and the liquidation instructions issued to CBP.
Why Does the Producer-Exporter Combination Matter?
Antidumping treatment is often company-specific. The exporter named on an invoice may not be the manufacturer, and a reseller may not qualify for the manufacturer's reviewed rate. Importers and brokers should compare both parties against the applicable case information and CBP instructions before applying a company-specific rate.
Was the Silicon Metal Antidumping Order Revoked?
No. Commerce preliminarily determined not to revoke the silicon metal order because PMB Silicon had not met the applicable revocation requirements. The order therefore remains active, even though PMB Silicon received a preliminary zero margin for the reviewed period.
Can Antidumping Duties Be Recovered Through Duty Drawback?
Generally, no. Antidumping and countervailing duties are typically excluded from drawback recovery. Importers may still have drawback opportunities involving eligible ordinary customs duties, but calculations should segregate AD and CVD payments to avoid overstating potential refunds.
How Stable Software Can Help
Separate Drawback Opportunity From AD Exposure
Customs brokers advising importers on Malaysian products need to distinguish recoverable customs duties from antidumping and countervailing duties that generally are not eligible for drawback. Clear separation supports more reliable refund projections, client reporting, and landed cost decisions.
DrawbackAI is Stable Software's flat-license duty drawback software for U.S. customs brokers. Brokers can white-label the software for importer clients and file drawback claims under their own filer code. Stable Software charges a flat software license and never takes a percentage of the refund. Brokers seeking to expand drawback services while retaining control of client relationships and filings can explore whether DrawbackAI fits their operating model.
Resources
| Type | Resource |
|---|---|
| Source | Primary source |



